BIOS update on CC3-CAJUN:
=========================

A BIOS update is accomplished by programming the FWH (*1) on the
CC3-CAJUN.

Follow the steps described below for a BIOS update:
- Copy all files of the ZIP archive to a bootable DOS formatted
  device (e.g. disk or USB stick)
- Boot the system from this device
- When the DOS prompt displays, press <P> <ENTER>
- Wait for end of programming, view result. If an error occurs
  during programming (which is very unlikely), try batchfile P.BAT
  once more BEFORE the system is reset
- When finished successfully restart your system with reset-button,
  a power-off-on sequence or by pressing CTRL-ALT-DEL

WARNING:
Do not interrupt the programming procedure in order to avoid
damage of the Flash. Programming takes max. 60 seconds if the BIOS
binary is loaded from a floppy disk and about 20 seconds when
the binary is loaded from an USB-Stick or a harddisk.

The new BIOS is present after resetting the system. If the
format of CMOS parameter has changed compared to the previous
BIOS version, all CMOS parameter will now automatically reset
to default settings.

To program the FWH on a EKF CC3-CAJUN at least version 5.6 of
utility 'progfwh.exe' (Nov. 2005) must be used. Older versions
of 'progfwh.exe' have limited support for EKF CC3-CAJUN.

(*1) FWH = Firm-Ware-Hub = Intel's designation for a Flash Memory
connected to the chipset via LPC bus.

For more questions, send an email to support@ekf.de

2005-11-29 EKF/cr