EKF - Short Profile
 EKF - Short Profile

 Home
 Search
 What's New
 Products
CompactPCI
CPU
CC9
CCD
CCG
CCM
CD3
 Services
 Sales Contact
 About EKF
CCM-BOOGIE
3U, High Performance Dual Core CompactPCI ® CPU Board
Dual-Screen Video • Dual Gigabit Ethernet • Dual-Channel Memory • 6 x SATA RAID
HTML documents available here
Description Product description in English

CCM-BOOGIE
PDF documents available here
Product Information CCM-BOOGIE Product information in PDF format - English

CCI Side Board
PDF Document, CCI-RAP Mezzanine Expansion Board, Technical Information, English
CCJ Side Board PDF Document, CCJ-RHYTHM Expansion Board, Technical Information, English
CCK Side Board PDF Document, CCK-MARIMBA Expansion Side Board, XMC/PMC Module Carrier, Technical Information, English
CCL Side Board PDF Document, CCL-CAPELLA Expansion Side Board, Quad Gigabit Ethernet, SATA Hard Disk, Technical Information, English
C23 Side Board PDF Document, C23-SATA Side Board, Technical Information, English
C40 Mezzanine PDF Document, C40-SCFA Mezzanine, Technical Information, English
C42 Mezzanine PDF Document, C42-SATA Low Profile Mezzanine, 1.8-Inch SATA Solid State Drive, Draft, English
Mezzanine Overview PDF Document, 3U CPU Expansion Side Boards and Mezzanine Modules, English

CCT Rear I/O Module
PDF Document, CCT-RIO Rear I/O Transition Module Technical Information Manual, English
Download area for drivers
 BIOS Update

Embedded Graphics Driver
Ethernet Driver ETH1
Ethernet Driver ETH2
Chipset Software
Matrix Storage Manager
Turbo Memory Driver

SATA RAID Driver
HD Audio Drivers

RMClock Utility
Subscription of the EKF NewsFlash, an E-Mail Letter with Announcements of Firmware and BIOS Updates
E-Mail on BIOS Update Subscription of the EKF NewsFlash, an E-Mail Letter with Announcements of Firmware and BIOS Updates, English
E-Mail bei BIOS Update Abonnement EKF NewsFlash, ein E-Mail Dienst mit Ankündigungen neuer Firmware/BIOS Updates, Deutsch
Download a photo in print quality Photos
4  |  5  |  6  |  7  |  8  |  9  |  10  |  15  |  16
Print Quality 300dpi 10x15cm .JPG ©EKF

CCM-BOOGIE

Dual Core High Performance CompactPCI ® CPU

Scalable from 1.2GHz Ultra Low Voltage Core™ 2 Duo to 2.26GHz Core™ 2 Duo
Dual-Screen Video • Dual Gigabit Ethernet • Dual-Channel Memory • 6 x SATA RAID



The CCM-BOOGIE is a versatile 4HP/3U CompactPCI® CPU board, equipped with an Intel® Core™ 2 Duo processor at up to 2.26GHz clock, and up to 8GB dual channel capable DDR3 RAM. Four native 3Gbps RAID capable Serial ATA channels are available for mass storage I/O, and in addition another two from a secondary RAID controller. The CCM-BOOGIE has been designed especially for systems which require dual core high performance at moderate power consumption.

The chipset is based on PCI Express® technology and has a powerful integrated graphics accelerator. The DVI-I front panel connector enables dual screen video operation. Two Gigabit Ethernet controllers are provided for high speed connectivity (one of them IEEE 802.1as TimeSync compliant). As an option, a mezzanine card is available that allows to use the CCM-BOOGIE in addition as CompactPCI® Express system slot controller (especially suited for hybrid dual backplane systems).


CCM-BOOGIE - Photo Soon Here


The CCM-BOOGIE is provided with a high performance mobile chipset (Intel® GS45) which operates at up to 1066MHz FSB and up to 1066MHz DDR3 memory clock for optimum system throughput. As a popular add-on option, a small mezzanine module is available (C40-SCFA), which can accommodate an industrial grade CompactFlash memory card, and an even more rugged USB Silicon State Drive (SSD), while still maintaining the 4HP envelope of the assembly.

The CCM-BOOGIE is equipped wit a set of local expansion interface connectors, which can be optionally used to directly attach a suitable (application specific) mezzanine companion side board, e.g. for audio- and legacy support, PCI Express based I/O circuitry, and a secondary DVI video output. Most mezzanine cards can accommodate in addition a 2.5-inch hard disk drive. Also as an option, a suitable rear I/O transition module is available to the CCM-BOOGIE.

Benefits of the CCM-BOOGIE
  • High Performance CompactPCI System Slot Controller with or w/o Rear I/O
  • CompactPCI Express System Board Option (CCJ-RHYTHM Mezzanine Expansion Card)
  • Hybrid Systems Option (Dual Backplane CompactPCI & CompactPCI Express)
  • Intel® Core™ 2 Duo SV (45nm Penryn) Mobile Processor 2.26GHz 6MB L2 Cache (FSB 1066MHz)
  • Scalable Series of Small Form Factor (SFF) Processors from 1.2GHz to 2.26GHz
  • PCI Express Mobile Intel® 45 Express Chipset GS45 (Cantiga)
  • Up to 2 x 4GB DDR3 Memory (Dual Channel Mode Capable, up to 1066MHz)
  • One Memory Bank Soldered (Low Memory) for Extreme Ruggedized Systems
  • Dual-Screen Graphics Controller
  • Dual Gigabit Ethernet Controllers
  • Four Native SATA Channels 3Gbps, Intel® Matrix Raid Storage Technology
  • Two Additional SATA Channels 3Gbps, RAID capable with JMicron Drivers
  • Eleven USB 2.0 channels
  • CompactFlash and/or USB SSD with C40-SCFA Mezzanine Module Option (4HP Maintained)
  • Variety of Mezzanine Expansion Boards Available with and w/o PCIe
  • TPM 1.2 Option (on Mezzanine Expansion Board or GS45 Internally)
  • Rear I/O Transition Module Option
  • Intel® AMT 4.0 Platform Management
  • RoHS compliant

CCM-BOOGIE Block Diagram

CCM-BOOGIE Block Diagram
Feature Summary CCM-BOOGIE
Form Factor Single size CompactPCI style Eurocard (160x100mm2), front panel width 4HP (20.3mm)
Processor Designed for Intel® Core™ 2 Duo SFF (Small Form Factor) processors (codename Penryn), 1066/800MHz FSB, maximum junction temperature 105°C, Enhanced Intel® Speedstep® Technology, Dual Core Multiprocessing, Intel® Virtualization Technology (VT), Intel® 64 Architecture
  • Core™ 2 SV • SP9300 • 2.26GHz • FSB 1066MHz • 6MB L2 Cache • 25W TDP
  • Core™ 2 LV • SL9400 • 1.86GHz • FSB 1066MHz • 6MB L2 Cache • 17W TDP
  • Core™ 2 ULV • SU9300 • 1.2GHz • FSB 800MHz • 3MB L2 Cache • 10W TDP
  • Celeron® M ULV • 722 • 1.2GHz • FSB 800MHz • 1MB L2 Cache • 5.5W TDP
Chipset Mobile Intel® 45 (Codename Cantiga) chipset comprised of:
  • GS45 Graphics/Memory Controller Hub (GMCH) with Intel® Gen. 5.0 integrated graphics engine with 10 fully-programmable cores, 1600x1200 dual independent display, HW support for H.264, MPEG2, VC-1, improved 3D capability (DirectX 10/OpenGL 2.0 support), estimated 533-MHz core render clock (low-power mode 266MHz), iAMT manageability engine, option Integrated Trusted Platform Module (ITPM)
  • ICH9M-E Enhanced I/O Controller Hub, integrated GbE MAC, 12 x USB (2 x EHCI, 6 x UHCI cntrls.), 4 x SATA 3Gbps, Intel® Matrix Storage Technology (RAID 0, 1, 5, 10), iAMT, High Definition Audio, unified SPI Flash support
Memory (RAM)
  • Maximum memory capacity of 8GB DDR3 up to 1067MHz
  • 512Mb, 1Gb, 2Gb technologies for x8 and x16 devices
  • Dual channel symmetric - memory addresses interleaved for increased performance, but memory module sizes must match
  • Intel® Flex Memory Technology (dual channel interleaved mode with unequal memory population) - memory module sizes maybe unequal in both the channels
  • Dual channel asymmetric - memory module sizes may differ, including no memory in the second channel (single-channel)
  • Channel 0 populated as directly soldered DDR3 devices (Low Memory)
  • Channel 1 provided as SODIMM socket to accommodate DDR3 module PC3-8500
Non Volatile Memory
(NVM) 		Intel® Turbo Memory card (codename Robson) on CCI-RAP mezzanine side board optionally available
  • PCI Express Mini Card 1G Byte Flash
  • Microsoft® ReadyDrive and ReadyBoost (Windows® Vista)
  • Intel® Turbo Memory driver
Video
  • Both (concurrently) analog monitor and digital flat-panel display support by DVI-I connector (front panel), up to QXGA 2048x1536 pixel 16M colours @75Hz refresh rate (analog), up to 1600 x 1200 pixel 16M colours @60Hz (digital), incorporates PanelLink Digital technology (Silicon Image).
  • Dual screen capable 2 x 1600 x 1200 pixel (one display attached to the front panel, the other to the back panel, or both to the front panel by means of a DVI-I to DVI-D/VGA splitter cable, or secondary DVI-D connector on mezzanine side board)
  • Front panel option: D-Sub (female HD15) VGA connector available, replaces DVI-I connector
  • Rear I/O option: Analog video across J2/P2 (CCT-RIO rear I/O transition module)
  • Mezzanine option: Secondary DVI-D connector at mezzanine card front panel allows for dual digital flat panel operation, suitable mezzanine modules e.g. CCH-MARIACHI, CCI-RAP or CCJ-RHYTHM
USB
  • All ports over-current protected, data transfer rate of up to 480Mbps, conforming to USB2.0
  • 2 x USB type A connector (front panel)
  • 3 x USB J2/P2 Rear I/O option (CCT-RIO rear I/O transition module)
  • 2 x USB ports expansion interface option (in use by several mezzanine side boards)
  • 4 x USB ports via J-HSE (C40-SCFA mezzanine storage module)
  • Dual EHCI / six UHCI controllers provided by ICH9M-E
Ethernet
  • Two 10/100/1000Mbps Gigabit Ethernet controllers, accessible via RJ45 jacks from the front panel
  • ETH1 equipped with Intel® 82567 PHY (codename Boazman), serves also as AMT out of band communication path (MAC provided by ICH9M-E), Jumbo Frame support up to 9KB
  • ETH2 equipped with Intel® 82574L GbE controller (codename Hartwell), connected to local PCIe lane, supports 9018-byte jumbo packets, TimeSync Offload compliant with 802.1as specification
  • Option ETH1 Gigabit Ethernet configurable (BIOS setup) across J2/P2 with attached CCT-RIO rear I/O transition module
SATA (Serial ATA)
  • Total of six 3Gbps SATA channels available
  • Triple-channel Serial ATA 3Gbps available for J2/P2 rear I/O option (derived from ICH9)
  • Suitable rear I/O transition module CCT-RIO (2 x system internal SATA, 1 x eSATA for attachment of external devices)
  • Intel® Matrix Storage Technology MST (Raid 1, 0, Matrix Raid)
  • Secondary on-board PCIe to SATA controller JMB362, dual channel SATA RAID, available via J-HSE expansion connector (plus 1 SATA channel in addition from ICH9)
  • Additional PCIe to SATA controller on mezzanine side boards e.g. CCI-RAP, CCK-MARIMBA, CCL-CAPELLA
PATA (IDE)
  • Option mezzanine module attached to J-HSE expansion connector
  • C40-SCFA mezzanine module available with on-board SATA to PATA bridge and CompactFlash socket
PCI Express
  • 4-Lane PCIe high-speed connector J-PCIE for CCJ-RHYTHM and other mezzanine expansion cards (side boards)
  • Possible configurations 1 Link x 4 Lanes or 4 Links x 1 Lane
Mezzanine Side Board I/O
  • J-EXP Legacy expansion interface connector LPC/USB/Audio (SIO, USB, HD Audio)
  • J-HSE High-speed expansion interface connector (3 x SATA, 4 x USB)
  • J-PCIE PCI Express 4-lane high-speed expansion connector
  • J-SDVO secondary digital graphics port high-speed expansion connector
  • Suitable mezzanine companion boards available, e.g.:
    • CCH-MARIACHI: Audio analog/digital, option secondary DVI-D
    • CCI-RAP: 2 x PCI Express Mini Card sockets (WLAN, GSM/UMTS/HSPA, WiMAX, Intel® Turbo Memory), options secondary DVI-D, IEEE 1394 (FireWire), USB SSD, C20-SATA mezzanine storage module (accommodates up to 2 SATA hard disk drives 2.5-inch RAID capable)
    • CCJ-RHYTHM: CompactPCI Express system slot controller function by on board 6-port 24-lane PCIe switch, options DVI-D, IEEE 1394 (FireWire)
    • CCK-MARIMBA: PMC/XMC module carrier, option C20-SATA mezzanine storage module
    • CCL-CAPELLA: Up to 4 Gigabit Ethernet ports, options IEEE 1394 (FireWire), USB SSD, C20-SATA mezzanine module
    • C23-SATA: PCIe to 2 x SATA 1 x PATA controller
    • C40-SCFA: SATA to PATA bridge & CompactFlash header, option USB SSD
J2/P2 Rear I/O
  • Suitable rear I/O transition module CCT-RIO available
  • 3 x Serial ATA (SATA), 2 x system internal SATA connectors, 1 x external eSATA connector
  • 1 x Gbit Ethernet (switched by BIOS between front panel I/O and rear I/O)
  • 3 x USB
  • VGA Analog Video (switched by BIOS between front panel I/O and rear I/O)
  • PS/2 Keyboard, Mouse
  • COM port (TTL Level)
CompactPCI®
  • ICH9M-E integrated 32-bit PCI bridge, 133MBps CPCI master
  • Additional PCI arbiter in PLD for fully figured 8-slot CompactPCI backplane
CompactPCI® Express
  • CCM-BOOGIE can be configured as CompactPCI Express System Board (system slot controller) by optionally available mezzanine expansion card (side board) CCJ-RHYTHM
  • CPCIe 4-Link configuration (4-lanes each), for up to 4 CPCI peripheral slots type 1 and/or type 2 on a passive CPCIe backplane
  • Suitable also for hybrid CPCI/CPCIe systems/backplanes (e.g. Schroff)
Platform Management
  • Option AMT 4.0 Intel® Active Management Technology (iAMT)
  • ARM core based Manageability Engine (ME) in the GMCH
  • Independent manageability firmware, stored in SPI Flash
Secure Computing
  • Option Trusted Platform Module TPM 1.2 according to Trusted Computing Group specifications, available on several mezzanine boards such as CCH/CCI/CCJ
  • Choose from either integrated solution (GS45 Intel® Trusted Execution Technology), or available as discrete controller on several mezzanine boards e.g. CCH/CCI/CCJ
  • Discrete crypto engine silicon brands Infineon or Atmel at users choice
BIOS
  • Phoenix BIOS with EKF enhancements for embedded systems
  • SPI Flash memory 2 x 16/32/64 Mb
  • Updates available from website ekf.com
Drivers (All Major OS)
  • Intel® graphics driver
  • Intel® networking driver
  • Intel® Matrix Storage Manager software
  • Intel® Turbo Memory driver
  • JMicron SATA driver
Thermal Conditions
Environmental Conditions
  • Operating temperature: 0°C ... +70°C (CPU dependent)
  • Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
EC Regulations
  • EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
  • 2002/95/EC (RoHS)
MTBF tbd
Typical Power Requirements Board +3.3V +0.17V/-0.1V +5V +0.25V/-0.15V
MaxPower LFM/HFM WinXP Idle LFM/HFM MaxPower LFM/HFM WinXP Idle LFM/HFM
CCM-6-BOOGIE tbd tbd tbd tbd
CCM-4-BOOGIE tbd tbd tbd tbd
CCM-2-BOOGIE tbd tbd tbd tbd
Typical Performance Rating
Measured with PCMark2005 under Windows XP, 2 x 2GB DDR3 800 		Board Processor CPU/MEM Score
CCM-6-BOOGIE SP9300 tbd
CCM-4-BOOGIE SL9400 tbd
CCM-2-BOOGIE SU9300 tbd
all items are subject to changes


Available as a rear I/O expansion board to the CCM-BOOGIE CPU card, the CCT-RIO is provided with several I/O port connectors, to be used either in addition to the CCM-BOOGIE front panel connectors or alternatively. Being mainly a passive rear I/O transition module, groups of signals from the CCM-BOOGIE CPU board are passed across the CompactPCI J2/P2 connector to the CCT-RIO. Some of the data lines are available locally on the CCT board for system internal wiring only, while other connectors such as VGA-Video and Gigabit Ethernet are mounted into the back panel for external use. USB and SATA (eSATA) channels are provided both on-board and externally.

Typically the CCT-RIO ist equipped with a 4-HP rear panel (20.3mm width). As a custom specific option, an 8-HP panel is available with additional connectors.

Utilization of the CCT-RIO transition module adds a level of I/O functionality that is not available with the CCM-BOOGIE CPU board alone. Further on, swapping the CPU card is simplified by means of rear I/O, which is important for efficient system maintenance (MTTR). Be sure to have ordered a CCM-BOOGIE rear I/O capable version and also the CPCI backplane suitable for rear I/O in order to use the CCT-RIO transition module.


CCT-RIO

CCT-RIO
Ordering Information CCM-BOOGIE
Alias Ordering No. Short Description
BOOGIE CCM-2RD-BOOGIE Core™ 2 ULV, Dual Core 1.2GHz, 3MB L2, FSB 800MHz
CCM-4RD-BOOGIE Core™ 2 LV, Dual Core 1.86GHz, 6MB L2, FSB 1066MHz
CCM-6RD-BOOGIE Core™ 2 SV, Dual Core 2.26GHz, 6MB L2, FSB 1066MHz
CCM-1RD-BOOGIE Celeron® M ULV, Single Core 1.2GHz, 1MB L2, FSB 800MHz
MARIACHI CCH-MARIACHI 3U/4HP Mezzanine expansion board for CCM-BOOGIE, HD audio codec (Azalia), option TPM 1.2, DVI-D digital video, analog/digital audio, RS-232 (COM), w/o USB
RAP CCI-RAP 3U/4HP Mezzanine expansion board for CCM-BOOGIE, 2 x PCI Express Mini Card sockets (e.g. WLAN, GSM, Robson Turbo Memory), USB Flash Disk option, DVI-D, 2 x FireWire, on-board SATA hard disk option (1 or 2 drives), option TPM 1.2
RHYTHM CCJ-RHYTHM 3U/4HP Mezzanine expansion board for CCM-BOOGIE, System Slot side board for CompactPCI Express backplanes, 24-port PCI Express packet switch, DVI-D, 1 x USB, 2 x FireWire, 1 x RS-232 (COM), on-board hard disk option, option TPM 1.2
MARIMBA CCK-MARIMBA 3U/4HP Mezzanine expansion board for CCM-BOOGIE, PMC/XMC module socket
CAPELLA CCL-CAPELLA 3U/4HP Mezzanine expansion board for CCM-BOOGIE, quad Gigabit Ethernet, USB Flash Disk option, FireWire, on-board SATA hard disk option (1 or 2 drives), option TPM 1.2
SATA C23-SATA 3U Super-I/O module, PCIe to SATA/PATA controller, 2 x RS-232, 1 x RS-232/RS-485, USB SSD, option audio codec AC'97, option TPM module
SCFA C40-SCFA Mezzanine module, SATA to PATA bridge, CompactFlash header, USB SSD option, fits into the 4HP envelope of the CCM-BOOGIE (J-HSE)
RIO CCT-1-RIO Rear I/O transition module for CCM-BOOGIE with SATA connectors
CCM-*R*-BOOGIE: suitable for rear I/O across J2
CCM-*X*-BOOGIE: suitable for 64-bit CPCI J2/P2 backplane
CCM-**D-BOOGIE: DVI-I video connector
CCM-**V-BOOGIE: VGA video connector
CCM-BOOGIE with C23-SATA Side Board (Picture Similar)

CCM-BOOGIE with C23-SATA Side Board (Picture Similar) (Picture Similar)
CCM-BOOGIE with CCJ-RHYTHM CPCI Express System Controller (Picture Similar)

CCM-BOOGIE with CCJ-RHYTHM CPCI Express System Controller (Picture Similar)
EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail