CR1-RACK
Low Profile System Rack for 6U CompactPCI Boards
1U, 19-inch CompactPCI Rack, 2 Slots P1-P5 Busprint (P3-P5 Rear I/O)
With the CR1-RACK, EKF introduces a 19-inch rack for
double size CompactPCI® boards
(6U Eurocard). The CR1-RACK is a very low space consuming solution for
horizontal mounting of two CPCI boards and has been designed for
optimum air-flow conditions.
|
|
The CR1-RACK is well suited for accommodating an all-in-one CPU board such as the
CD2-BEBOP or CD3-JIVE, with an on-board mass storage unit and (optionally)
a rear I/O transition module. Another CPCI slot is provided for an additional I/O board.
|
|
Technical Specifications
|
|
General
|
19-Inch shielded system rack, for horizontal mounting of 6U CPCI cards from
the front side (160mm depth), and 6U rear I/O cards from the back side
(80mm depth), according to IEC 60297-3-101, -102, -103;
IEEE 1101.1, 1101.10/11)
|
|
Height
|
1U (43.65mm)
|
|
Width
|
84HP (449mm)
|
|
Depth
|
275mm
|
|
CompactPCI Bus
|
- 2 x P1-P5 (P1-P2 PCI 64-bit, P3-P5 rear I/O)
- System slot bottom (left)
|
|
Power supply (ATX style)
|
- Input 200W 100-240VAC w. PFC
- Outputs 3.3V/14A, 5V/20A, +12V/16A, -12V/0.8A
|
|
Fans
|
- Hot swap fan drawer unit (4 fans)
- Horizontal air flow
|
technical specifications are subject to change without further notice
|
CD2-BEBOP Pentium® M CPU Board
|
|
Ordering Information |
|
Ordering Number
|
Short Description
|
|
CR1-1-RACK
|
19-Inch rack 1U, 2 slots CompactPCI 6U backplane P1-P5 (rear I/O P3-P5), power supply 200W
|
|
CR9-5-ADAPT
|
Front panel expansion kit, converts 3U CPCI board front panel to 6U
|
|
CD2-3A-BEBOP
|
6U, Pentium M 2.0GHz 755, 512MB DDR SDRAM, 6 x USB, 4 x Ethernet (3 x GB),
PICMG 2.16 Dual Link, IDE, SATA, CompactFlash ATA slot, 1 x PMC mezzanine,
DVI-I video, rear I/O, on-board USB Flash drive
|
|
CDY-1-RIO
|
J3/J4/J5 rear I/O transition module for CD2-BEBOP
|
Additional options and ordering numbers see product information
CD2-BEBOP
|
