PC1-GROOVE
High Performance Low Power CPU Card
Suitable for Classic CompactPCI® and PICMG 2.30 CompactPCI® PlusIO Systems
The PC1-GROOVE is a powerful 4HP/3U
CompactPCI® CPU board, equipped with an
Intel® Core™ i7 processor (dual core, quad threads) scalable from
1.06GHz up to 2.66GHz clock (Turbo Boost up to 3.2GHz), and
integrated graphics. The PC1-GROOVE front panel is
provided with two Gigabit Ethernet jacks, two
USB receptacles, and either the Vesa DisplayPort
connector for attachment of a high resolution
display (DVI adapter available), or the
classic VGA connector as an alternate option.
|
|
Conforming to the PICMG® 2.30 CompactPCI®
PlusIO specification, the PC1-GROOVE in
addition provides standardised high speed rear I/O across the backplane
connector J2, such as PCI Express®, SATA, and
Gigabit Ethernet. In a hybrid backplane system,
the PC1-GROOVE acts as a bridge to PICMG®
CPCI-S.0 CompactPCI® Serial cards. In a classic
CompactPCI® system, any 2.30 compliant rear I/O transition
module such as the PR1-RIO may be used as an option.
|
|
PC1-GROOVE • Rugged High Performance Core™ i7 CPU
|
The PC1-GROOVE is equipped wit a set of local
expansion interface connectors, which can be
optionally used to attach a mezzanine side
board. A variety of expansion cards is available,
e.g. providing legacy I/O and additional PCI
Express based I/O circuitry such as SATA and
Gigabit Ethernet, or a secondary video output.
Most mezzanine cards can accommodate in
addition a 2.5-inch drive.
|
|
Typically, the PC1-GROOVE and the related side
card would come as a readily assembled 8HP
unit. As an alternate, Flash based mezzanine
storage modules are available that fit on the
PC1-GROOVE while maintaining the 4HP
profile. The C42-SATA module e.g. is equipped
with a very fast 1.8-inch SATA Solid State Drive
(SSD), which is suitable for installation of any
popular operating system.
|
|
Benefits of the PC1-GROOVE
|
- CompactPCI® System Slot Controller
- CompactPCI® PlusIO Rear I/O According to PICMG® 2.30
- Hybrid Systems Option (Dual Backplane CompactPCI® and CompactPCI® Serial)
- Based on the Intel® Calpella-ECC Low Power Platform (Arrandale+ECC CPU, IbexPeak-M PCH)
- Intel® Core™ i7-600 Mobile Processor, Two Cores, 4 Threads, 3 Level Cache Hierarchy,
Multi-Core CPU Turbo Boost Technology, Integrated Graphics Engine
- Standard Voltage Processor i7-610E 2.66GHz (3.33/3.06GHz Single/Dual Core Turbo Mode)
- Low Voltage Processor i7-620LE 2.0GHz (2.8/2.53GHz Single/Dual Core Turbo Mode)
- Ultra Low Voltage Processor i7-660UE 1.33GHz (2.4/tbdGHz Single/Dual Core Turbo Mode)
- Ultra Low Voltage Processor i7-620UE 1.06GHz (2.13/1.73GHz Single/Dual Core Turbo Mode)
- DDR3 Memory (Dual Channel Mode Capable, up to 1066MHz PC3-8500)
- One Memory Bank Soldered (Low Memory) for Extreme Ruggedized Systems
- One Socket for a DDR3 SODIMM Module
- Intel® Mobile Series QM57 Express Chipset Platform Controller Hub (IbexPeak-M)
- Three Port Graphics Controller (Front Panel: DisplayPort or VGA Connector)
- SDVO (DVI) and Secondary DisplayPort Channel Via Mezzanine Connector
- Max Resolution 2560x1600 (DisplayPort), 1920x1200 (DVI), 2048x1536 (VGA)
- Quad Gigabit Ethernet Controllers
- Six Native SATA Channels 3Gbps
- Two Additional SATA Channels 3Gbps, RAID capable with JMicron Drivers
- Twelve USB 2.0 Channels
- SATA 1.8-Inch Solid State Drive (SSD) with C42-SATA Mezzanine Module Option (4HP Assembly Height Maintained)
- CFast™ Flash Card with C41-CFAST Mezzanine Module Option (4HP Maintained)
- CompactFlash and/or USB SSD with C40-SCFA Mezzanine Module Option (4HP Maintained)
- On-Board PCI Express® Packet Switch (4 Lanes available for Rear I/O and CPCI Serial
Backplane Respectively, another 4 Lanes for Mezzanine Side Card)
- Variety of Mezzanine Expansion Boards (Side Cards) Available with and w/o PCIe
- Most Mezzanines Optionally Equipped with 2.5-Inch Single- or Dual-Drive
- Rear I/O Transition Module Option
- UEFI Phoenix BIOS with ACPI
- Long Term Availability
- RoHS compliant
|
|
PC1-GROOVE with C41-CFAST Mezzanine Module
|
CompactPCI® PlusIO (PICMG 2.30) is a new standard for rear I/O across J2,
specified by the PICMG®. High speed
signal lines (PCI Express®, SATA, Gigabit Ethernet and USB)
are passed from the PC1-GROOVE
through the special UHM connector to the
backplane, for usage on CompactPCI® Serial
card slots or a rear I/O transition module.
|
|
CompactPCI® Serial (PICMG CPCI-S.0) defines a
completely new card slot, based on PCI
Express®, SATA, Gigabit Ethernet and USB
serial data lines.
On a hybrid backplane, both card styles,
CompactPCI® and CompactPCI® Serial, can
coexist, with the PC1-GROOVE in the middle as
system slot controller for both backplane
segments.
|
|
PC1-GROOVE • High Speed Rear I/O Backplane Connector J2 UHM
|
|
|
Ordering Information |
Please refer to List 21 for popular PC1-GROOVE SKUs
For popular mezzanine side cards please refer to List 20
|
|
PC1-GROOVE with C44-SATA Side Card
|
|
PC1-GROOVE with C45-SATA Side Card (Front Panel Removable SSD Version)
|
|
PC1-GROOVE with CCO-CONCERT Side Card
|
|
